Resin Bound Surfacing is attractive, long lasting and relatively maintenance free. When applied correctly, Resin Bound Surfaces will provide your driveway, path or outside area with all year tidiness.  

 

Applying a Resin Bound Surface to your driveway or pathway will improve grip and will help to prevent slipping in wet and icy conditions. (Providing the correct after care guidelines have been adhered to and the areas are kept swept clean and free from debris e.g. leaves).  

 

When choosing a Resin Bound Contractor to lay your Resin Bound Surface, it is important to ensure that the Resin Bound contractor that you select is a reputable one. Kent Resin Bound Surfacing is an approved contractor for Ronacrete. Kent Resin Bound Surfaces only use the best quality resin bound systems and stone aggregates available.

 

It is possible to lay Resin Bound Surfaces during the latter months of the year, however, many Resin Bound Surfacing Contractors will not lay resin surfaces in adverse cold and wet weather conditions because it may take longer for the resin to set.  

 

To ensure a smooth, seamless finish, it is vital that the base upon which the Resin Bound Surface is applied, must be solid and even. If the base is unstable or uneven, the resin bound surface may break away from the sub base, which will allow frost and moisture to get in. If this happens, it is impossible to repair the resin bound surface and the repair will be noticeable. The problem area would need to be cut out and redone. In this instance, owing to the aging of the surrounding area, the colour variations and colour mix of replacement stones etc. it might be impossible to match the colour of the replacement with the existing area.  

Kent Resin Bound Surfacing will carry out a site survey at the time of quoting for any proposed works and Kent Resin Bound Surfacing will always point out any uneven or unsound areas which will not be suitable for laying a resin surface over. If ground works are required to prepare the surface prior to the laying of the resin.   

 

Kent Resin Bound Surfacing can provide a quotation for tarmacking, digging out and preparing surface areas in addition to the laying of aco drains, brick borders and edging stone surrounds. There are a number of benefits of using Kent Resin Bound Surfaces for external drives, paths, patios and public areas.  

 

Resin Bound Surfacing is made of porous material which makes it SUDS (Sustainable Urban Drainage Systems) compliant and this means that with a Resin Bound Surface you have peace of mind that you are helping to reduce the risk of flooding.

 

There is an extensive range of Resin Bound Surface colour mixes that can be used, which enable it to blend in well with any existing surrounding colour scheme.

 

With a Resin Bound Surface, there is very little maintenance other than keeping the surface clean and free from debris. When compared to block paving, wooden decking or gravel drives, the initial outlay for a Resin Bound Surface will be slightly more, but the advantages of a Resin Bound Surface are that it can be used in areas of flooding.

 

Resin Bound Surfacing looks more attractive than tarmac.

 

With Resin Bound Surfacing there is no need to continually weed, as there would be with block paving.

 

With Resin Bound Surfacing, there is no need for regular staining or treating, as there would be with wooden decking.

 

If you would like to find out more about Resin Bound Surfacing, please contact us.

Resin Bound Surface Canterbury Kent

Resin Bound Surface Canterbury Kent

Driveway after application of silver moon colour resin

Driveway after application of silver moon colour resin

Resin Bound Surface on New Build Drive

Resin Bound Surface on New Build Drive

Resin bound pathway in colour silver moon

Resin bound pathway in colour silver moon

silver moon resin colour

silver moon resin colour

Resin Bound Surface

Resin Bound Surface

Kent Resin Bound Surface On Drive

Kent Resin Bound Surface On Drive

Resin Bound Internal Surface

Resin Bound Internal Surface

Resin Bound Surface on Path Kent

Resin Bound Surface on Path Kent

Kent Resin Bound Surfacing Driveway

Kent Resin Bound Surfacing Driveway

Resin Bound Pathway

Resin Bound Pathway

Resin Bound Garden Area

Resin Bound Garden Area

Resin Bonded Balcony

Resin Bonded Balcony

Resin Bound Drives in Kent

Resin Bound Drives in Kent

IMG_0653.JPG

IMG_0653.JPG

Resin Bound Drives in Kent

Resin Bound Drives in Kent

IMG_0655_edited.JPG

IMG_0655_edited.JPG

Resin Bound Pathway Doddington Churc

Resin Bound Pathway Doddington Churc

Autumn gold resin bound drive & pathway_edited.JPG

Autumn gold resin bound drive & pathway_edited.JPG

Autumn Gold Resin Bound Pathway_edited.JPG

Autumn Gold Resin Bound Pathway_edited.JPG

Resin Bound school playground

Resin Bound school playground

Colourful quartz stone is hardwearing and gives an interesting and fun look for playground areas.

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drive Kent

Resin Bound Drive Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Patio in Kent

Resin Bound Patio in Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drives in Kent

Resin Bound Drive Samples

Resin Bound Drive Samples

For a quotation for Resin Bound Drives in Kent, please call:-

​07894 833779 / 07515 596706
or email:- 
kentresinboundsurfacinq@yahoo.com
 

© 2014 Kent Resin Bound Surfacing  Part of Pagel Homes Ltd.

  • w-facebook
  • Twitter Clean